The St Ayles Skiff Kit including shipping, handling and HST sales tax
LUMBER (please see SCR website for material dimensions and quantity)
The building frame was constructed of 2 sheets of 5/8” spuce plywood, cut into strips and laminated
The hog was one piece of Douglas fir
Stems, keel, cox seat, breasthooks and tiller handle were white oak
Ash wood was used for the inside and outside gunnels plus the spacer blocks
Floorboards were made of Western red cedar planned to 5/8” thick
Note: U.S. kit includes rudder and thwarts
Two gallons of West System epoxy
Additives included 403 Microfibers Adhesive Filler and 410 Microlight Fairing Filler
Other supplies: pumps, acetone, mixing pots, disposable brushes, gloves, masks
PAINT & VARNISH
One gallon Interlux Brightside Primer (not quite enough for two coats, inside and out)
Two quarts of Brightside One-Part Polyurethane (two coats outside)
One quart Brightside One-Part Polyurethane and one quart flattening agent (two coats inside)
Two quarts Sikkens Cetol Marine Natural Finish (lots left over for next year’s touch-up)
Other supplies: sanding disks, sandpaper, brushes, thinners, tape
FITTINGS and FASTENERS
Permanent silicon bronze screws were used at each plank end, cox seat slats, floorboards and along the removable outer gunnel. A few stainless bolts were used to attach rudder fittings, tiller, footstretchers and bow eye.
Stainless rudder fittings (Holt Allen 3/8″ pintles and RWO strap gudgeons) and a bow eye
Bow and stern lines, fenders, safety kit, trailer tie down straps, flag, etc.
OARS and OARLOCKS
Five carbon Macon sweep oars and Concept2 oarlocks
TOTAL COST TO BUILD SEA SHADOW
It took 5 months and appoximately 800 – 1,000 hours to complete the boat and trailer.
We were very fortunate to have the expertise and equipment to build our own trailer.
Cost includes: spare tire and swivel jack
$1,100 (material costs)